AAC Blocks

We present our maiden product Aerated Autoclaved Concrete Blocks made with Internationally proven state of the art technology. Its appearance is light coloured, containing many micro cells that can be clearly seen when looked at closely.
It is inorganic and combustible and it is about one-fifth the density of normal concrete blocks and one-third density of conventional clay bricks. The moisture absorbed is less than 2 percentage. These AAC blocks are the right investment, justified for buildings intended to have a lifelong saving.
It can deliver big savings in heating and cooling costs through the life of a building and national savings on electricity due to its thermal mass performance and insulating properties. It is an energy-efficient product.

Block thickness 75mm, 100mm, 150mm, 200mm
Face Size (L X H) 600 x 200
Dry Density 550 – 650 Kg/Cu M
Compressive strength 3 min N/Sq. mm
Thermal conductivity 0.16 W/m deg. k
Sound Insulation (STC) 37-42 db.
Fire  Resistance (LB) 4 hours for 200 mm thick
Fire Resistance (NLB) 4 hours for 100 mm thick
Drying Shrinkage 0.02%
Water Absorption < 2%>

Facets of AAC Blocks

  • Eco Friendly
  • Light Weight
  • Energy Efficient
  • Fire, Insect & Pet Resistant
  • Energy Saving due to high thermal insulation

Advantages of AAC Blocks

Light Weight:

Our products are lightweight having density range from 550 Kg/m3 to 650 Kg/m3. Despite millions of tiny air-filled cells, products are strong and durable. The light weight advantage for the structure design leads to savings in supporting structures and foundation.

Earthquake Resistant:

Our products are lighter than concrete and brick respectively. The lightness of the material increases resistance against earthquake as well as less chances of loss/damage to human lives.


Our products are typically produced in rectangular shape for internal and partition walls or in shapes as may be required. The products are light weight, making them easy to place and secure using less skilled labour. The blocks can be sawed, drilled and shaped like wood using standard hand tools, regular screws & nails. It is simpler than brick or concrete.

Water absorption:

Our products being closed cellular structure have lower water absorption less than 2% as compared to other conventional walling materials.

Skim Coating:

Our homes & buildings require no plaster and a usual water-repellent paint suffices. However, if one desired can also apply plaster. Blocks have superb adhesive properties. It is also possible to apply wallpapers directly on the surface.

Compressive strength:

Our products are available in a wide range of density from 550 Kg/m3 to 650 Kg/ m3 of average compressive of 2.0 to 7.0 N/mm2.

Excellent Acoustic Performance:

Our products have excellent acoustic performance and can be used as effective sound barriers and for acoustic solutions. Hence highly suitable for partition walls, floor screens / roofing and panel material in auditoriums.


Our products provide superior thermal insulation properties compared to that of conventional brick and concrete. This property reduces the heating and cooling expenses.

Life Span:

Our products are weather proof, termite resistant, fire proof & are thus, durable for long life.

Savings in Material:

Our material being light in weight reduces dead weight of the filler walls in framed structures by more than 50% as compared to brick work resulting in substantial saving (10% - 15%) in the cost of structure. In addition, due to bigger and uniform shape of blocks, there are less number of joints in the masonry, thereby resulting in substantial saving in cement, sand and water which are costly as well as scarce.

Environment friendly:

Our blocks replace Red bricks by saving fertile soil and vegetation and also by partial cement replacement with Fly Ash. “Green House Gases” created during cement manufacturing is dramatically reduced.

For Enquiry Call: 09895076990

Back to Top